Problem: Digidesign C|24 control surface has a microphone embedded into the meter bridge for talkback applications. When I would push the talkback button and turn up the talkback gain, all I would hear was white noise through the C|24 Cue outputs.

Solution: In my case, all my wiring was correct…

Studio 6 is now a tracking space with connection to the North Machine Room and Studio 7.

Inputs/Outputs include 8 microphone tie lines to Studio 7 and 8 microphone tie lines to the North Machine Room (NMR). Plus, a “Cue” jack…

Using iMac with OS 10.4.7, Pro Tools 7.4 and a 003 factory.

003 set to internal clock.

Start recording and pops and clicks are seen and heard.

Troubleshooting.

1. unplug everything from 003 except power cord and firewire cable –> no change
2. reset firmware on 003 –> no change
3. replace firewire cable –> no change
4. trade out…